WHAT IS DIGITAL X-RAY Imaging?
Digital X-ray imaging produces a clear, accurate image of the features embedded in concrete.
Digital concrete x-ray imaging involves the non-destructive use of hard X-rays or gamma rays to image the interior of a concrete target to identify and locate rebar, conduit, post tension cables and other embedded objects. We capture images using an x-ray machine. We also capture images digitally, which increases productivity and safety compared to using film. Digitally rendering the X-ray image means that we can process and produce an accurate image of the subsurface in mere seconds, without the time-intensive lab processing necessary for film-based X-ray imaging.
We recommend using X-ray imaging when you need to:
-
Definitively identify the location and type of hazard in concrete
-
Inspect green concrete, as moisture makes GPR less effective.
-
Core or cut in a congested area
-
Maintain operations without extended shutdowns
What Can Concrete X-Ray Locate?
Cutting, coring, and breaking concrete is no longer a guessing game. Our imaging services can precisely identify the location, depth, and orientation of numerous embedded features, including:
- Reinforcing Steel: Mapping rebar and wire mesh to avoid structural damage.
- Post-Tension Cables: Critical for maintaining the structural integrity of slabs.
- Conduits: Locating electrical and data lines to prevent outages and electrocution risk.
- Pipes & Utilities: Identifying water, sewer, and gas lines.
- Structural Voids: Detecting honeycombing or air pockets that could compromise strength.
SAFETY AND EFFICIENCY
Digital X-ray imaging is safer and more efficient than film-based X-ray.
Penhall Subsurface's digital X-ray service processes images in seconds instead of relying on film and lab delays. Our radiographers undergo specialized training and certification and can perform digital X-ray imaging in a range of settings. Our technicians are well versed in both common and less common on-the-job hazards, along with the procedures needed to manage them, the kind of knowledge that comes from Penhall's position as the nation's leader in concrete solutions. Increase worksite safety with digital X-ray imaging and finish work without interruption or delay.
Cutting, coring, and breaking concrete can be dangerous work, since the odds of striking a subsurface feature are high. Before work begins, it's necessary to establish the location and type of embedded feature within the concrete surface, so your crew can cut, core, or break with confidence.
DIGITAL X-RAY VS GPR SCANNING
Digital X-ray produces a clear, definitive image of the subsurface, whereas ground penetrating radar (GPR) uses radio waves to produce a radargram, which shows subsurface undulations.
There are two ways in which to locate subsurface features within concrete: X-ray imaging or GPR. There are advantages and limitations to each process. At Penhall, we provide both services—we can work with you to determine the concrete scanning type most suitable for your project.
Digital X-ray imaging:
X-ray can be used in situations in which GPR is not effective, or when clear, definitive imaging is required. Highly congested slabs are ideally suited for the application of digital X-ray. Scanning concrete with X-ray can be performed on concrete of various thicknesses. Penhall’s digital X-ray technology acquires images immediately, allowing the radiographer to examine and mark the location and exact type of subsurface feature without the need to develop film at a lab.
Digital X-ray does require access to both sides of the concrete slab and is not suitable for scanning slab-on-grade concrete. Also, unlike GPR, digital X-ray cannot be used to determine the depth of subsurface features, only the location, size, and type.
Which Should You Use?
| Comparison | Digital X-Ray | GPR Scanning | Key Difference |
|---|---|---|---|
| Access Needed | Both sides of the slab | One side only; works on slab-on-grade | GPR fits more job sites |
| Result | A clear image of the feature | Data that's interpreted to find features | X-ray needs no interpretation |
| Depth Data | Location, size, and type only | Location, depth, and type | GPR is the only one that measures depth |
GPR scanning:
Ground penetrating radar (GPR scanning) is also used to detect subsurface features, including rebar and rebar patterns, post-tension cables, and pipes and conduits. GPR can detect voids and deterioration within concrete, making the process ideal for avoiding potential structure collapse. GPR emits radio waves that travel through concrete and map the various undulations in the waves’ paths. This produces a radargram, which is interpreted to determine location, depth, and type of feature within the concrete. It does not require access to both sides of the concrete and can be used to scan slab-on-grade.
GPR cannot produce a clear, definitive image of the subsurface like digital X-ray imaging. The data GPR produces must be interpreted once scanning is complete in order to identify the types of features present in the slab.
| Feature | GPR | X-Ray |
|---|---|---|
| Radiation Exposure | NO | YES |
| Access to both sides? | NO | YES |
| Power required? | NO | YES |
| Restricted Area? | NO | YES |
| Resulting Image? | NO IMAGE | CLEAR IMAGE |
| Interpretation? | SUBJECTIVE | DEFINITIVE |
| Determine Size? | NO | YES |
| Determine Depth? | YES | NO |
Digital X-ray imaging vs GPR:
Digital X-ray and GPR both locate features within concrete. However, they accomplish this result differently.
X-ray can definitively identify the location and type of feature embedded in concrete because it produces a clear image. Because Penhall uses digital processing, the scanning process is safe and efficient. Digital X-ray is more specialized as it cannot be used to scan slab-on-grade concrete.
GPR does not produce images, but rather data that can be interpreted by a trained analyst, who will use the information to identify the location and type of feature within the concrete. GPR can be used to scan slab-on-grade and other concrete that is only accessible from one side.
CUSTOMER TESTIMONIALS
frequently asked questions
WHY CHOOSE PENHALL COMPANY
What makes Penhall's X-ray service different:
- Digital imaging produces a clear picture of the slab in as little as five seconds, with no film processing or lab wait
- Certified, specially trained radiographers on every job, not just technicians who also happen to run an X-ray unit
- Handles congested rebar and green, moisture-heavy concrete that can trip up other scanning methods
- Radiation exposure kept well under state-mandated limits, with proper PPE and safety protocol on every scan
- Nationwide coverage, with the option to pair X-ray with GPR scanning when a project needs both
Whether the job calls for a quick X-ray scan or a full GPR survey beforehand, Penhall brings the same trained crews and equipment to concrete imaging that we bring to cutting, coring, and demolition work across the country.